NewBeeDrone BeeID v1.1 M10Q GPS Module with Remote ID & Drone Tracker

The NewBeeDrone BeeID v1.1 puts three jobs on one 5.2 g board: a u-blox M10Q GNSS receiver for GPS Rescue and navigation, a Remote ID broadcast transmitter, and a Bluetooth LE tracker beacon that keeps transmitting after a crash so you can walk to a downed quad with a phone app.

Key features

• u-blox M10Q with a ceramic antenna and 72-channel tracking of GPS, GLONASS and Galileo
• BLE tracker beacon for finding a quad after losing video and control link
• Remote ID broadcast certified to US FAA requirements for aircraft over 250 g
• Configured over WiFi from a phone or PC
• Standard UART on 5 V; works with Betaflight, INAV, ArduPilot and PX4
• Built-in barometer feeds the Remote ID altitude only, not flight control

Specifications

• GNSS module: u-blox M10Q
• Constellations: GPS L1, GLONASS L1, Galileo E1
• Receiving channels: 72
• Antenna: Ceramic
• Baud rate: 115200 bps
• Speed accuracy: 0.05 m/s
• Dimensions: 22 x 15.6 x 8 mm
• Weight: 5.2 g
• Power: 5 V
• Interface: UART
• Operating temperature: -40 to +85 °C

Wire BeeID TX to the flight controller's RX and BeeID RX to TX on the same UART, plus 5 V and ground. The Remote ID function follows US FAA rules and India's DGCA has its own requirements, so treat this module as a navigation and recovery aid, not as proof of Indian compliance.