HGLRC MY10 10-Inch Long Range FPV Frame

The HGLRC MY10 is a 10-inch carbon fibre quad frame for long-range, payload and cinematic FPV builds. Its 415 mm wheelbase and 7 mm arms keep torsional flex and vibration down with high-power motors swinging 10-inch props.

Key features

• 7 mm carbon arms for stiffness under large-prop loads

• 30.5 x 30.5 mm (M3) flight controller stack mount

• VTX mounting for 30.5 x 30.5 mm (M3), 25.5 x 25.5 mm (M2) and 20 x 20 mm (M2) boards

• 16 x 16 mm (M3) motor mounts

• 19–20 mm camera mount for DJI O4 Pro, O3 and analog cameras

• 217 g frame weight

Specifications

• Wheelbase: 415 mm

• Overall dimensions: 310 x 365 mm

• Top plate: 2 mm

• Middle plate: 3 mm

• Bottom plate: 3 mm

• Arm thickness: 7 mm

• Camera side plates: 2 mm

• FC mounting: 30.5 x 30.5 mm (M3)

• VTX mounting: 30.5 x 30.5 mm (M3), 25.5 x 25.5 mm (M2), 20 x 20 mm (M2)

• Motor mounting: 16 x 16 mm (M3)

• Camera mounting: 19–20 mm

• Battery mounting: Top or bottom

• Weight: 217 g ±5 g (with antenna mount, screws and anti-slip pad)

• In the box: Frame set, M3 screws (8/14/16/25 mm), 8 x M3 x 28 mm aluminium standoffs, 4 x M3 nylon lock nuts, antenna mount and cap, 4 motor wire guide tubes, 2 x 440 mm cable ties, anti-slip battery pad, sticker sheet

Check your motors before ordering: the arms take 16 x 16 mm M3 patterns only, and many 31xx-class motors use a 19 x 19 mm base. The flight controller stack must be 30.5 x 30.5 mm.