GEPRC TAKER F405 BLS 80A V2 Stack

The GEPRC TAKER F405 BLS 80A V2 stack pairs the GEP-F405-HD V3 flight controller with the TAKER H80_BLS 80A dual-MOSFET 4-in-1 ESC. This high-current combination is meant for large long-range, cinematic and heavy-lift builds on 3-6S. It plugs straight into a DJI air unit and comes with an XT90 plug, a 10AWG power lead and a dual-capacitor filter board.

Key features

• STM32F405 with ICM42688-P gyro, onboard barometer and 16MB blackbox
• Six UARTs and six motor outputs (M1-M6)
• Dual independent BECs (12V 2.5A and 5V 3A) with an integrated LC power filter
• 80A continuous, 85A burst (5 s) ESC with dual MOSFETs and a current sensor
• Silicone shock-absorbing mounts keep the gyro signal clean

Specifications

• FC MCU: STM32F405
• Gyro: ICM42688-P (SPI)
• Blackbox: 16MB
• OSD: Betaflight OSD (AT7456E)
• UARTs: 6
• Motor outputs: M1-M6
• BEC: 5V 3A, 12V 2.5A
• USB: USB-C
• Firmware target: GEPRCF405
• FC size / weight: 37.15 x 37.15mm, 7.3g
• ESC firmware: BLHeli_S (target B_X_30)
• ESC current: 80A continuous, 85A burst (5 s)
• ESC protocols: DShot150/300/600
• ESC size / weight: 56.3 x 61.1mm, 28.1g
• Mounting: 30.5 x 30.5mm (4mm holes, 3mm with silicone grommets)
• Input: 3-6S LiPo

Check frame clearance before buying. The ESC board measures 56.3 x 61.1mm, much larger than the boards on GEPRC's 60A and 65A stacks, but it still bolts to 30.5 x 30.5mm holes. The supplied lead ends in an XT90, so packs with XT60 plugs need an adapter or a new connector.