Foxeer M10Q 180 V2 GPS with IST8310 Compass
SKU GEN-M10Q-180-V2-IST8310
Brand: Generic
Free standard shipping on orders of ₹999 and above. Pan India delivery from Gurugram, Haryana.
Buying in bulk? Ask for a better price on WhatsApp or by email.
- 100% genuine parts
- GST invoice with every order
- Secure payments — cards, UPI & net banking via Razorpay
- 7-day returns on wrong or damaged items
Product details
The Foxeer M10Q 180 V2 is an 18x18mm GPS module built on a 10th-generation u-blox M10 receiver, with an IST8310 compass on the same board. At 7.5g it suits 3.5-5 inch freestyle quads, cinewhoops and light long-range builds that need GPS Rescue, position hold or return-to-home.
Key features
u-blox M10 chip with 72 channels, tracking GPS, GLONASS, BeiDou, Galileo, SBAS and QZSS
IST8310 magnetometer on its own SDA/SCL lines for heading on INAV and ArduPilot
Ceramic patch antenna plus a built-in backup battery for faster re-acquisition
10Hz update rate by default (1-10Hz configurable), UBX protocol with NMEA support
Runs on Betaflight 4.3 or newer, INAV and ArduPilot
Specifications
GNSS chip: u-blox M10, 72 channels
Compass: IST8310
Input voltage: 5V
Baud rate: 115200bps
Update rate: 1-10Hz (10Hz default)
Horizontal accuracy: 1.5m 2D (outdoor)
Speed accuracy: 0.05m/s
Sensitivity: -166dBm tracking, -160dBm acquisition
Operating temperature: -40 to +85°C
Size: 18 x 18 x 8mm
Weight: 7.5g
Wire TX and RX crossed to a free flight-controller UART along with 5V and ground, then run SDA and SCL to the FC's I2C pads for the compass. Mount it antenna-up, away from the VTX and power leads, and set the magnetometer alignment to match how the board sits in your frame.
| Compass Included | Yes |
|---|---|
| Made in India | No |
| Brand | Foxeer |
| GNSS Chipset | u-blox M10 |
| Weight | 7.5 g |
| Supported Firmware | ArduPilot, Betaflight, INAV |
From builders
Reviews
No reviews yet — be the first to write one.
Related
