SEQURE H743 V2 & E160 G2 Stack 160A

The SEQURE H743 V2 & E160 G2 stack pairs a 480MHz H743 flight controller with SEQURE's E160 G2 4-in-1 ESC, rated 160A continuous and 280A peak per channel. It is built for the heaviest cinelifters and for X8 and 13-inch-plus builds. Choose the 8S or 12S option to match your packs.

Key features

• E160 G2 ESC on an STM32G071 MCU, running AM32 or BLHeli_32
• Supports all DShot rates plus PWM, OneShot and MultiShot
• Built-in current sensing, with RPM, temperature and current telemetry
• Thick-copper multi-layer PCB with an on-board copper bar and dual power pads for parallel packs
• H743 V2 FC with ICM-42688-P, barometer, 16MB blackbox, eight motor outputs and an independent 10V 2A BEC for DJI O3, O4 or O4 Pro

Specifications

• FC MCU: STM32H743
• Gyro: ICM-42688-P
• Barometer: BMP280 / DPS310 / DPS368
• OSD: AT7456E
• Blackbox: 16MB
• UARTs: 6
• FC input: 4-8S
• FC BEC: 5V 2.5A, 10V 2A
• Firmware: Betaflight (SEQUREH7V2, default), INAV, ArduPilot
• FC size / weight: 36.5 x 36.5 x 6mm, 7.3g
• ESC input: up to 12S LiPo/LiHV (8S and 12S options)
• ESC current: 160A continuous, 280A peak
• ESC BEC: 16V 2A
• ESC mounting: 30.5 x 30.5mm (4mm holes, M3)
• ESC size / weight: 54 x 57 x 10mm, 66g

The flight controller is a 4-8S board. On 12S it must be powered from the ESC's 16V BEC, not from pack voltage. The ESC measures 54 x 57mm, so check that your frame has room for it.