SEQURE H743 V2 & E130 G2 Stack 8S 130A

The SEQURE H743 V2 & E130 G2 stack pairs a 480MHz H743 flight controller with a 4-in-1 ESC rated 130A per channel, for 4-8S heavy-lift, cinelifter and X8 builds. The ESC's thick-copper multi-layer PCB, on-board copper bar and dual power pads are made for large parallel packs.

Key features

• E130 G2 ESC: 130A continuous and 220A peak per channel, on an STM32G071 MCU
• Runs AM32 or BLHeli_32; supports all DShot rates plus PWM, OneShot and MultiShot
• Built-in current sensing, with RPM, temperature and current telemetry
• H743 V2 FC with ICM-42688-P, barometer, 16MB blackbox and eight motor outputs (M1-M8)
• Independent 10V 2A BEC for DJI O3, O4 or O4 Pro air units or an analog VTX

Specifications

• FC MCU: STM32H743
• Gyro: ICM-42688-P
• Barometer: BMP280 / DPS310 / DPS368
• OSD: AT7456E
• Blackbox: 16MB
• UARTs: 6
• FC input: 4-8S
• FC BEC: 5V 2.5A, 10V 2A
• Firmware: Betaflight (SEQUREH7V2, default), INAV, ArduPilot
• FC size / weight: 36.5 x 36.5 x 6mm, 7.3g
• ESC input: 4-8S (14-35.2V) LiPo/LiHV
• ESC current: 130A continuous, 220A peak
• ESC BEC: 16V 2A
• ESC mounting: 30.5 x 30.5mm (4mm holes, M3)
• ESC size / weight: 54 x 57 x 7mm, 43g

In the box you get the FC and ESC, two 63V 1200uF capacitors, an XT90H-M connector, two 150mm 8AWG power leads and shock-absorbing M3 x 10mm mounting hardware. The 54 x 57mm ESC is meant for 10-inch-plus cinelifter and heavy-lift frames with large 28xx-42xx motors on 10-13 inch props.