OLED Display Module for Pixhawk 2.4.8
OLED Display Module for Pixhawk 2.4.8
OLED Display Module for Pixhawk 2.4.8
OLED Display Module for Pixhawk 2.4.8
Autopilot Accessories & CAN Hubs

OLED Display Module for Pixhawk 2.4.8

₹599Incl. GST

SKU GEN-PIXHAWK-OLED-DISPLAY

Brand: GenericMade in India: NoProduct Type: OLED Display
Dispatched within 2–3 business days — quality-checked in Gurugram

Free standard shipping on orders of ₹999 and above. Pan India delivery from Gurugram, Haryana.

Questions about this part? Ask us on WhatsApp

Buying in bulk? Ask for a better price on WhatsApp or by email.

Product details

A compact I2C OLED screen for Pixhawk 2.4.8 flight controllers that shows the autopilot's live status on the aircraft itself, so you can check readiness at the field without a laptop or ground station. It is a status display only and does not overlay anything on FPV video.

Key features

  • Plugs into the autopilot's I2C port and runs on 3.3-5 V, so the port's own supply powers it
  • Supported natively by ArduPilot: set NTF_DISPLAY_TYPE to 1 for an SSD1306 controller or 2 for an SH1106, then reboot
  • Shows key autopilot status and status-text messages, including pre-arm failures
  • Weighs 3 g and is rated for -30 to 70 °C

Specifications

  • Interface: I2C
  • Operating voltage: 3.3-5 V DC
  • Operating temperature: -30 to 70 °C
  • Weight: 3 g

On a Pixhawk 2.4.8 the single I2C port usually carries the GPS module's compass, so add an I2C splitter to run both. If the screen stays blank, try the other NTF_DISPLAY_TYPE value, as many modules sold as SSD1306 actually use an SH1106 controller; some newer boards also need an ArduPilot build with I2C display support enabled.

From builders

Reviews

No reviews yet — be the first to write one.