HDZero AIO15 Digital AIO Flight Controller

The HDZero AIO15 is an all-in-one digital FPV board for 2-3S whoops and micro freestyle quads. It puts a flight controller, 15A 4-in-1 ESC, HDZero 5.8GHz VTX and ELRS 2.4GHz receiver on one 25.5x25.5mm board. Add an HDZero camera and motors and the electronics are complete.

Key features

• STM32G473 flight controller with ICM42688 gyro and onboard voltage and current sensing
• Integrated HDZero digital VTX with 25mW and 200mW output
• Built-in ELRS 2.4GHz receiver
• 15A continuous, 18A peak per motor, with Bluejay ESC firmware and DShot600
• 7.2g with motor plugs

Specifications

• MCU: STM32G473, 170MHz
• Gyro: ICM42688
• ESC: 15A continuous, 18A peak, Bluejay
• VTX: HDZero 5.8GHz, 25/200mW
• Receiver: ELRS 2.4GHz
• BEC: 5V
• Input: 2-3S LiPo (3.5-13V)
• Board size: 31.3 x 31.3mm
• Mounting: 25.5 x 25.5mm, M2
• Weight: 7.2g with motor plugs
• Firmware target: HDZERO_AIO15

The AIO15 takes HD composite cameras that run over a single wire, such as the HDZero Lux or HDZero Eco. MIPI cameras do not plug in. It works with HDZero goggles only, not DJI, Walksnail or analog. It suits 1103-1404 class motors on 25.5x25.5mm frames. In the box you get the board, an XT30 power lead, a lightweight linear VTX antenna, an adapter board and cable, four screws and four rubber grommets.