T-Motor Pacer V4 P2406 2060KV Motor

The T-Motor Pacer V4 P2406 2060KV is a 6S freestyle motor built around a wide 2406 stator for strong torque and smooth, linear power on 5-inch props. It weighs 36 g with leads and produces up to 1993 g of thrust.

Key features

• Nickel-plated arc magnets and imported 684ZZ bearings

• Dynamic balance held under 5 mg for low vibration

• 5 mm shaft with an M5 × 10 mm prop thread

• 16 × 16 mm M3 mount for standard 5-inch arms; the 30.2 mm bell needs slightly more arm clearance than a 2207

• Coils insulation-tested at 500 V, in a waterproof and dustproof design

• Peaks of 48 A and 1116 W (1 s), so run an ESC rated 50 A or more per motor

Specifications

• KV: 2060KV

• Configuration: 12N14P

• Stator: 2406

• Rated voltage: 24 V (6S LiPo)

• Shaft: 5 mm, M5 × 10 mm thread

• Motor dimensions: Ø30.2 × 31 mm

• Weight: 36 g (with leads)

• Lead wires: 20AWG, 150 mm

• Mounting: 16 × 16 mm, M3

• Internal resistance: 45 mΩ

• Idle current (10 V): 1.9 A

• Peak current (1 s): 48 A

• Max power (1 s): 1116 W

• Max thrust: 1993 g

• Bearings: 684ZZ

Each motor comes with a hardware kit. Pair it with 5-inch props on an M5 hub.