Holybro Pix32 v6 Flight Controller — Set: FC Module Only
Holybro Pix32 v6 Flight Controller
Holybro Pix32 v6 Flight Controller
Holybro Pix32 v6 Flight Controller
Holybro Pix32 v6 Flight Controller
Holybro Pix32 v6 Flight Controller — Set: Standard Set
Holybro Pix32 v6 Flight Controller
Holybro
Autopilots & Pixhawk FCs

Holybro Pix32 v6 Flight Controller

₹23,299Incl. GST

SKU HOLYBRO-PIX32V6-FC

Set: FC Module Only

Integrated Receiver: NoIntegrated VTX: NoFC Processor: H743Gyro: ICM42688P, BMI088
Dispatched within 2–3 business days — quality-checked in Gurugram

Free standard shipping on orders of ₹999 and above. Pan India delivery from Gurugram, Haryana.

Questions about this part? Ask us on WhatsApp

Buying in bulk? Ask for a better price on WhatsApp or by email.

Product details

The Holybro Pix32 v6 is a modular autopilot based on the Pixhawk 6C (FMUv6C) design: the flight controller module plugs into a separate carrier board through a 100-pin connector. It runs PX4 and ArduPilot, so it suits multirotors, fixed-wings, VTOLs and other autonomous vehicles, and Holybro publishes the baseboard schematics for anyone designing a custom carrier board sized and pinned for their own airframe.

Key features

  • STM32H743 flight processor (Cortex-M7, 480 MHz) with 2 MB flash and 1 MB RAM, plus an STM32F103 I/O co-processor

  • Redundant ICM-42688-P and Bosch BMI088 IMUs on a vibration-isolated mount, held at working temperature by onboard heating resistors

  • Onboard IST8310 compass and MS5611 barometer

  • 16 PWM servo outputs (8 from the FMU, 8 from the I/O processor) and two CAN buses for DroneCAN GPS, ESCs and sensors

  • Two analog power inputs plus USB, for power redundancy across up to three sources

Specifications

  • FMU processor: STM32H743, Cortex-M7, 480 MHz, 2 MB flash, 1 MB RAM

  • I/O processor: STM32F103, Cortex-M3, 72 MHz

  • IMUs: ICM-42688-P, BMI088

  • Compass: IST8310

  • Barometer: MS5611

  • PWM outputs: 16

  • Serial ports: TELEM1 and TELEM2 (full flow control), TELEM3

  • GPS ports: GPS1 (with safety switch), GPS2

  • Other buses: 2 x CAN, 1 x I2C

  • RC input: Spektrum/DSM, S.BUS, CPPM; dedicated S.BUS output

  • Power input: 4.9-5.5 V on POWER1/POWER2 (6 V max); USB 4.75-5.25 V

  • Servo rail: 0-36 V

  • FC module size: 44.8 x 44.8 x 13.5 mm

  • FC module weight: 36 g

  • Firmware: PX4 (FMUv6C target), ArduPilot

FC Module Only is the bare flight controller module: choose it if you already have a Pix32 v6 baseboard or are building your own carrier. Standard Set adds the standard baseboard, a PM02 V3 power module (5.2 V / 3 A regulated output from packs up to 12S) and the standard cable set, leaving only GPS, receiver, ESCs and telemetry to add.

Holybro Pix32 v6 Flight Controller

From builders

Reviews

No reviews yet — be the first to write one.

Compatible

Complete your build