CUAV 7-Nano V2 Flight Controller
CUAV 7-Nano V2 Flight Controller
CUAV 7-Nano V2 Flight Controller
CUAV 7-Nano V2 Flight Controller
CUAV 7-Nano V2 Flight Controller
CUAV
Autopilots & Pixhawk FCs

CUAV 7-Nano V2 Flight Controller

₹30,099Incl. GST

SKU CUAV-7NANO-V2

FC Processor: H7Gyro: IIM-42652, IIM-42653Made in India: NoBrand: CUAV
Dispatched within 2–3 business days — quality-checked in Gurugram

Free standard shipping on orders of ₹999 and above. Pan India delivery from Gurugram, Haryana.

Questions about this part? Ask us on WhatsApp

Buying in bulk? Ask for a better price on WhatsApp or by email.

Product details

The CUAV 7-Nano V2 is a coin-sized autopilot with an H7 processor, dual redundant IMUs and Ethernet in a 33 g laminated stack. It suits space-constrained platforms such as FPV-size frames and micro coaxial helicopters running ArduPilot or PX4.

Key features

  • H7 at 480 MHz: STM32H753 with a double-precision FPU and 2 MB flash, plus support for secure boot and secure firmware updates.

  • Dual industrial-grade IMUs: a redundant pair with automatic failover if one sensor faults.

  • Built-in magnetometer: a ±50 Gs dynamic range for better rejection of magnetic interference.

  • Ethernet port: a direct link to an onboard companion computer.

  • 14 PWM outputs: M1-M8 switch between 3.3 V and 5 V signal levels.

  • Side-exit connectors: wiring leaves from the sides, which makes installation in tight frames easier.

Specifications

  • Processor: STM32H753, Cortex-M7, 480 MHz, 2 MB flash

  • IMUs: IIM-42652 and IIM-42653

  • Barometers: ICP-20100 and BMP581

  • PWM outputs: 14

  • UARTs: 5 (TELEM1, TELEM2, GPS and safety, GPS2, debug)

  • CAN buses: 2

  • I2C: 3

  • Ethernet: 1

  • RC input: PPM, SBUS, DSM

  • Logging: TF card slot

  • USB: Type-C

  • Operating voltage: 4.5-5.5 V

  • Dimensions: 30.5 x 25.5 x 31.8 mm

  • Weight: 33 g

  • Operating temperature: -20 to 85 °C

  • Firmware: ArduPilot 4.6.3 or later, PX4

The board runs on 4.5-5.5 V, so power it from a power module or a 5 V BEC, never straight from the flight pack. ELRS and CRSF receivers connect to a spare UART, not to the RC input.

CUAV 7-Nano V2 Flight ControllerCUAV 7-Nano V2 Flight ControllerCUAV 7-Nano V2 Flight ControllerCUAV 7-Nano V2 Flight ControllerCUAV 7-Nano V2 Flight ControllerCUAV 7-Nano V2 Flight ControllerCUAV 7-Nano V2 Flight ControllerCUAV 7-Nano V2 Flight ControllerCUAV 7-Nano V2 Flight Controller

From builders

Reviews

No reviews yet — be the first to write one.

Compatible

Complete your build