1200TVL FPV Camera with 2.8mm Lens (Without Stand)

Analog 1200TVL FPV camera with a 2.8 mm lens for RC multirotors and planes, supplied as the bare camera without a mounting stand or bracket. A budget option for analog builds where the camera goes into your own mount or a printed holder.

Key features

• 1/3-inch CMOS image sensor with PAL video output
• Wide-angle 2.8 mm lens
• Low-light sensitivity down to 0.01 lux at F1.2
• Signal-to-noise ratio above 60 dB with AGC off
• On-screen menu for adjusting the image parameters
• Runs on a 7–12 V supply

Specifications

• Resolution: 1200TVL
• Image sensor: 1/3-inch CMOS
• Video system: PAL
• Lens: 2.8 mm
• Minimum illumination: 0.01 lux at F1.2
• S/N ratio: above 60 dB (AGC off)
• Supply voltage: 7–12 V
• Mounting stand: not included

The 7–12 V input suits a 2S LiPo or a 9 V / 12 V regulated pad on the flight controller or PDB; do not wire it straight to a 3S or larger pack, which exceeds 12 V when charged. Pair it with any analog VTX that takes composite video in, and make sure your goggles or monitor display PAL.