JINJIEAN B19 1500TVL Analog FPV Micro Camera (19mm)

The JINJIEAN B19 is a 1500TVL analog FPV camera in the standard 19 x 19 mm micro form factor, sized for the micro camera mounts found on most racing and freestyle frames, as well as fixed-wing noses, RC cars and robots that need a simple, low-latency analog feed. A 1/3-inch CMOS sensor sits behind a 2.1 mm wide-angle lens, and the composite output plugs straight into any analog VTX.

Key features

• Digital WDR and 3D noise reduction to hold detail when flying from shade into bright sky
• Rated down to 0.001 lux at F1.2, with auto, colour and black-and-white day/night modes
• PAL/NTSC switchable from the internal OSD menu, which also sets brightness, exposure mode, gain and white balance
• About 6 g in a 19 mm body that fits standard micro camera brackets and side plates
• DC 5-20 V input, so it runs from a 5 V BEC or directly from a 2-4S pack
• Choose a black, red or orange housing

Specifications

• Sensor: 1/3" CMOS
• Resolution: 1500TVL
• Lens: 2.1 mm
• Video output: CVBS analog, PAL/NTSC switchable
• S/N ratio: above 60 dB (AGC off)
• Electronic shutter: PAL 1/50-1/100,000 s; NTSC 1/60-1/100,000 s
• AGC: low / middle / high
• Minimum illumination: 0.001 lux @ F1.2
• Power input: DC 5-20 V
• Size: 19 x 19 mm
• Weight: approx. 6 g

Confirm your frame takes a 19 mm micro camera; whoop and toothpick canopies built for 14 mm nano cameras need a smaller unit. Set PAL or NTSC to match your goggles or monitor for the cleanest picture.