T-Motor G32*11 3.2" Propeller (2-Blade, 1.5mm Shaft) — 2pcs/Pair

The T-Motor G32×11 is a 32-inch (812.8 mm) two-blade integrated propeller for heavy-lift multirotors — 12S agricultural sprayers, cargo, inspection and large cinelifter platforms running U12- or U13-class motors. It ships as a two-piece set covering one CW propeller (marked "L") and one CCW propeller (marked "R").

Key features

• 32 × 11 inch diameter and pitch (812.8 × 279.4 mm), moulded as a single integrated two-blade unit in carbon fibre and epoxy with a glossy finish.

• 35 kg thrust limitation per propeller; optimum operating band of 1200–3000 RPM.

• T-Motor matches it to U12-KV90, U13-KV85 and U13-KV100 motors with FLAME 80A HV ESCs on 12S, delivering roughly 4–9 kg of thrust per motor at 55–65% throttle.

• Working temperature −40 °C to 65 °C; store at −10 °C to 50 °C below 85% humidity, away from reactive solvents and gases.

• T-Motor specifies medium-strength or stronger thread-locking compound on the hub screws, and warns against bending blades by hand to test stiffness.

Specifications

• Model: G32×11 (G32*11)

• Diameter × pitch: 812.8 mm × 279.4 mm (32 × 11 inch)

• Blades: 2, integrated

• Material: carbon fibre + epoxy, glossy finish

• Weight: 107 ± 5 g per blade (T-Motor datasheet)

• Thrust limitation: 35 kg

• Optimum RPM: 1200–3000 RPM

• Pack contents: one CW and one CCW propeller

A pair covers one clockwise and one anticlockwise position, so a quadcopter build needs two pairs. Match these blades to the motor's rated thrust rather than its KV alone — they are designed for the low-RPM, high-torque U12/U13 class, not for 5-inch FPV motors.