SpeedyBee F405 AIO V2 Flight Controller & 35A ESC (8-Bit, 3–6S)

The SpeedyBee F405 AIO V2 integrates an STM32F405 flight controller and a 35A (40A peak) 8-bit ESC onto a single board with a 25.5x25.5 mm mounting pattern. Designed for 3-6S power systems, it simplifies wiring and saves weight on 3-inch and 4-inch cinewhoops, sub-250 g builds, and ultralight 5-inch toothpick drones requiring high ESC current overhead.

Key features

• Delivers 35A continuous (40A peak) per motor on 3-6S LiPo packs, supporting high-KV motor setups without requiring an external ESC stack.

• Features an ICM42688P gyro for clean motion tracking and high PID loop rates in Betaflight.

• Dedicated solder pads and UART allocation support both analogue transmitters and HD digital video systems like the DJI O3 Air Unit, RunCam Link, and Caddx Vista.

• The 8-bit ESC ships with Bluejay firmware for bidirectional DShot and RPM filtering.

• Built-in Bluetooth lets you configure the board and update its firmware from the SpeedyBee app.

Specifications

• MCU: STM32F405

• Gyro / IMU: ICM42688P

• Barometer: SPA06-003

• Blackbox: 8MB flash

• UARTs: 4

• OSD: yes

• USB: Type-C

• ESC continuous current: 35A (40A peak)

• Input voltage: 3-6S

• ESC firmware: Bluejay (JH-40, 48 kHz)

• Supported FC firmware: Betaflight

• Mounting pattern: 25.5x25.5

• Dimensions: 33 x 33 x 7 mm

• Weight: 8.9 g

When installing in tight whoop or toothpick frames, ensure adequate airflow around the FETs and solder a low-ESR capacitor across the main battery leads on 6S setups to absorb destructive voltage spikes.