Simplifly SiK Telemetry Radio 433MHz 100mW

This SiK telemetry radio links a Pixhawk-standard autopilot to a ground station at 433MHz, running the widely supported SiK firmware that Mission Planner and other MAVLink tools already recognise.

Key features

• 100mW adjustable transmit power with -117dBm receive sensitivity, for a typical out-of-the-box range beyond 700m.
• Frequency-hopping spread spectrum with error correction for up to 25% bit errors, for a robust link in noisy RF conditions.
• Two-way, full-duplex MAVLink telemetry between the air and ground units.
• Plug-and-play with Pixhawk-standard flight controllers, configured through Mission Planner or APM Planner.
• Supplied as a matched air-and-ground pair with antennas and the cables needed to connect both ends.
• Range extends well beyond 700m with a ground-side patch antenna in place of the supplied antenna.

Specifications

• Frequency: 433MHz
• Transmit power: 100mW (adjustable)
• Receive sensitivity: -117dBm
• Antenna connector: RP-SMA
• Interfaces: USB Type-C (ground station) and 6-pin JST-GH (flight controller)
• Air/ground units: identical and interchangeable

In the box

• 2 x radio modules with antennas
• 1 x USB Type-C to USB-A cable
• 1 x USB Type-C to USB Type-C cable
• 1 x Android OTG adapter cable
• 1 x JST-GH 6-pin to JST-GH 6-pin cable
• 1 x JST-GH 6-pin to DF13 6-pin cable

Use it strictly as a telemetry link — it does not replace an FPV video transmitter or an RC control receiver.