RunCam WifiLink2 OpenIPC Digital FPV Air Unit

The RunCam WifiLink2 is a pre-assembled, pre-configured air unit for the open-source OpenIPC and RubyFPV digital FPV platforms, combining camera, transmitter and active cooling in one housing. It takes most of the setup work out of OpenIPC while leaving full control of video quality, latency, bitrate and network settings, which makes it a good fit for experienced pilots on 5-inch-and-up quads and planes.

Key features

• Sony IMX415 sensor with a 160° M12 lens on a 130 mm MIPI cable, in a 19 mm micro camera size
• Up to 1080p at 60/90fps, or 720p at 120fps
• Up to 800 mW output (320 mW recommended with RubyFPV)
• CNC aluminium heatsink housing with a cooling fan
• Two U.FL (IPEX1) antenna connectors; MSPOSD and MAVLink OSD support

Specifications

• Sensor: Sony IMX415
• Lens: M12, 160° FOV
• Camera size: 19 x 19 mm
• Video: 1080p 60/90fps, 720p 120fps
• Max transmit power: 800 mW
• Wi-Fi chip: RTL8812EU
• SoC: SigmaStar SSC338Q
• Antenna connectors: 2 x U.FL (IPEX1)
• Weight: 30 g with fan

Power it from a regulated BEC rather than straight from the flight pack. The ground side needs an OpenIPC or RubyFPV receiver, such as the RunCam WiFiLink-RX or an Android phone running PixelPilot; it does not pair with DJI, Walksnail, HDZero or analog goggles. Setup is more involved than a closed digital system, so allow time for configuration.