Axisflying Argus H743 Pro Flight Controller (Dual ICM42688P)

The Axisflying Argus H743 Pro is a 30.5x30.5 mm flight controller built on the STM32H743 processor with two ICM42688P gyros. It targets 5 to 10 inch freestyle, long-range, cinematic and heavy-load FPV builds that need processing headroom, a barometer and plenty of serial ports.

Key features

• STM32H743 at up to 480 MHz, with onboard OSD and 16 MB Blackbox flash for tuning logs

• Dual ICM42688P gyros with external clock sync and independent power supplies

• DPS368 barometer for altitude hold and steady hovering

• Dual BEC: 5V/2.5A for peripherals and 12V/2A for an HD video air unit

• 7 UARTs, so receiver, GPS, HD video and telemetry each get their own port

• Current sensor input, LED and buzzer support, and plug-in connectors for most wiring

Specifications

• Processor: STM32H743, 480 MHz

• Gyro: 2x ICM42688P

• Barometer: DPS368

• Blackbox: 16 MB flash

• BEC outputs: 5V/2.5A, 12V/2A

• UARTs: 7

• Motor outputs: 8 (M1-M8)

• Firmware: Betaflight

• Dimensions: 38 x 38 x 8 mm

• Mounting: 30.5 x 30.5 mm, M3

• Weight: 9 g

With eight motor outputs, one board can run an X8 cinelifter across two 4-in-1 ESCs, and the 12V rail suits HD air units such as the DJI O4 and Walksnail Avatar.