Gemfan Propellers
Gemfan Propellers
246 products
Gemfan propellers cover almost every size a multirotor flies, from 31mm whoop props to 15-inch glass-fibre nylon blades for cinelifters and heavy-lift quads. This page collects every Gemfan propeller in our Propellers range. Match the size and shaft to your motors first — whoop props are sold by diameter in millimetres and shaft (0.8mm, 1mm, 1.5mm or T-mount), everything larger by diameter and pitch in inches with a 5mm or larger hub — then choose blade count and material for the flying you do.
How to choose a Gemfan prop
Gemfan's four-digit names read diameter then pitch: 1050 is a 10 × 5 inch prop, 1219 a 31mm whoop prop. Blade count and material follow.
- Whoop and micro (31mm, 35mm, 40mm, 45mm, 65mm): polycarbonate, 2 to 4 blades, on 0.8mm, 1mm, 1.5mm or T-mount shafts to match 06xx–12xx motors. Usually sold in sets of 8.
- Ducted (D63, D75, D90): props shaped for cinewhoop ducts of that diameter.
- 2 to 4-inch: Hurricane 2008 to 4525, Flash 3052 and 4052, RotorX 2535 and Floppy Proppy F3015 and F4019 for toothpicks, 3-inch cinewhoops and 4-inch quads.
- 5-inch freestyle and racing: Hurricane, Flash, Floppy Proppy, Fury, VannyStyle, Hulkie and WinDancer props in polycarbonate; tri-blades for grip, bi-blades and the Master 3D for specific styles.
- 7-inch and long range: the LR series (4024, 6026, 7035), Hurricane 7050, Flash 7040 and 7042, and the folding F7036.
- Cinelifter and heavy-lift (8040 to 1510): glass-fibre reinforced nylon props sold in pairs (1CW + 1CCW) for 8 to 15-inch frames.
- Material: polycarbonate flexes and survives crashes on small quads; GFN and carbon-nylon stay stiff on big props where flex costs efficiency.
What we stock
Over a hundred Gemfan listings: the Hurricane, Flash and Floppy Proppy families from 2 to 7 inches; 31mm 1208, 1209, 1219, 1219S and 1220 whoop props; 35mm and 40mm 1608, 1609, 1635 and 1636 props; 45mm and 65mm micro props; D63, D75 and D90 ducted props; 5-inch Fury, VannyStyle, SBANG, Hulkie, WinDancer and the Master 3D; the LR long-range series; and cinelifter props from 8040, 8046 and 9045 through 1050, 1070, 1080, 1170, 1270, 1308 to 1310, 1507 and 1510 in glass-fibre nylon. Use the size filter on the Propellers page to narrow to your frame.
Compatibility
Whoop props must match the motor shaft exactly: most 0702 and 0802 motors take 1mm shafts (a few smaller motors 0.8mm), 1102–1103 motors take 1.5mm, and 1202–1204 motors usually T-mount. 5-inch props fit any 5mm-shaft motor with an M5 nut. Cinelifter props use a 5mm or 6mm bore and often come with adapter rings; check the motor's shaft or the hub bolt pattern.
Buy in sets — a set of 8 whoop props is two full sets, a pair of cinelifter props is half a quad — and keep spares of each rotation.
Frequently asked questions
- How do I read Gemfan prop sizes?
- The first two digits are diameter, the last two are pitch: 1050 is 10 inches × 5 inches, 51466 is 5.1 × 4.66. Whoop props are named by diameter in millimetres (31mm, 40mm) plus a model number like 1636.
- 1mm, 1.5mm or T-mount shaft for whoop props?
- Check the motor: most 0702 and 0802 motors have 1mm shafts (a few smaller ones 0.8mm), 1102 and 1103 motors 1.5mm, and most 1202–1204 motors use a T-mount with two screws. The prop hub must match.
- Do cinelifter props come in pairs or sets of four?
- Gemfan's glass-fibre nylon cinelifter props are sold as 1CW + 1CCW pairs; a quad needs two pairs. Most 7-inch polycarbonate props come in sets of four.