GEPRC T-Cube18 Analog FPV Whoop (ELRS)

The GEPRC T-Cube18 is a 1.8-inch analog whoop with an 87mm wheelbase and a 38g all-up weight, built on a 1.5mm carbon plate. Its ELRS 2.4GHz receiver is built in, so it binds straight to any ELRS radio. That makes it a good first micro for indoor practice, gardens and calm park flying.

Key features

• TAKER F411-12A-E 1-2S AIO with an STM32F411 processor, BMI270 gyro and 12A 8-bit ESC

• SPEEDX2 1002 25000KV motors on Gemfan 45mm props

• Caddx Ant camera with a RAD Tiny 5.8GHz VTX at up to 400mW

• A30 battery connector; GEPRC recommends a 1S LiHV 530mAh pack

• Spare props, two drivers and battery bands in the box

Specifications

• Wheelbase: 87mm

• Weight: 38g (+/-1g)

• Flight controller: TAKER F411-12A-E 1-2S AIO (STM32F411CEU6, BMI270)

• ESC: 12A, 8-bit

• Motors: SPEEDX2 1002 25000KV

• Props: Gemfan 45mm

• Camera: Caddx Ant

• VTX: RAD Tiny 5.8GHz, 400mW

• Receiver: built-in ELRS 2.4GHz

• Battery connector: A30

• Recommended battery: 1S LiHV 530mAh

• Flight time: 3-5 minutes at low-speed cruise

In the box you get the quad, two pairs of spare Gemfan 45mm props, a plum screwdriver, a 1.5mm L-shaped hex driver and eight rubber bands for the battery. You will also need an ELRS 2.4GHz radio, analog 5.8GHz goggles, 1S LiHV packs with A30 plugs and a charger to match.