HGLRC Rekon 3.5 V2 2S Analog FPV Drone w/ ELRS 2.4GHz

The HGLRC Rekon 3.5 V2 is a sub-250g micro long-range platform bridging the gap between park-flyer toothpicks and full-size 4-inch cruisers. Its 3.5-inch propellers deliver the wind resistance, efficiency, and payload capacity needed for mountain surfing and cinematic exploration without the noise and bulk of larger rigs. This 2S variant runs on two 18650 Li-ion cells carried inside its enclosed body and charges them in place over USB-C, delivering up to 15 minutes of flight time. It arrives ready to fly with an onboard analog FPV system and a pre-installed ELRS 2.4GHz receiver for a secure control link and low-latency video right out of the box.

Key features

• 3.5-inch platform: balances micro-drone agility with the cruising efficiency and wind handling of larger long-range builds.
• 2S Li-ion power: takes two 18650 cells and charges them on board at up to 15 W (auto-stop when full), delivering up to 15 minutes of flight time.
• Analog FPV system: a dependable, low-latency video link for confident medium-range exploration.
• Pre-installed ELRS 2.4GHz: a robust, high-refresh-rate control link that outpaces standard receivers.
• Sub-250g class: an airframe weight of around 174g keeps you under regulatory weight limits with appropriate batteries.

Specifications

• Model: HGLRC Rekon 3.5 V2
• Power Input: 2S Li-ion, 2 x 18650 cells (on-board charging, 7.0-8.4 V)
• FPV System: Analog
• Receiver: ELRS 2.4GHz
• Propeller Size: 3.5 inch
• Airframe Weight: approx. 174g
• Flight Time: up to 15 minutes
• Flight controller: HGLRC H743 20A 2S AIO, ICM42688P gyro
• Motors: Specter 1404 5500KV
• VTX: HGLRC Zeus Nano, 350mW
• GPS: HGLRC M100 Mini, on board
• Propellers: Gemfan 3630
• In the box: drone, 8 x Gemfan 3630 propellers, 1 m USB-C charging cable, 1.5 mm hex wrench, 8 x M2x8 screws, sticker sheets, manual

Note: This is a BNF (Bind-And-Fly) drone. It requires a compatible ELRS 2.4GHz radio transmitter, an analog FPV goggle, and two 18650 Li-ion cells to fly.