NewBeeDrone AcroBee65 Brushed V2 ELRS BNF with SmartMAX VTX

The AcroBee65 Brushed V2 is a 65 mm, 1S brushed tiny whoop sold bind-and-fly: the ELRS 2.4 GHz receiver is built into the flight controller, so you bind your own radio and fly. It suits first-time FPV pilots learning indoors and indoor racers who want a tough, light whoop that shrugs off crashes.

Key features

• SmartMAX video transmitter: choose 25 mW or 100 mW, or let SmartMAX boost output up to 400 mW based on board temperature for steadier video through walls and across car parks
• SPI ELRS 2.4 GHz receiver on an STM32F411 / BMI270 board; your radio needs ELRS 3.0 or newer
• 4-channel 12A brushed ESC with active braking for a locked-in feel, plus turtle mode to flip upright after a crash
• Cockroach 65 mm super-durable brushed frame with NewBeeDrone Gold Edition 6 mm brushed motors and Azi 31 mm tri-blade props
• 21.2 g without battery, 28.8 g with a 300 mAh 1S pack
• Frame and canopy colours are mixed at the factory, so colour may vary

Specifications

• Size: 65 mm
• Motors: Gold Edition 6 mm brushed
• Props: Azi tri-blade 31 mm, 0.8 mm shaft
• Flight controller: STM32F411, BMI270 gyro, 29 × 29 × 7.6 mm, 25.5 × 25.5 mm mounting
• ESC: 4-channel 12A brushed, active braking
• Receiver: SPI ELRS 2.4 GHz (ELRS 3.0 and newer)
• VTX: 5.8 GHz, 25 / 100 mW, SmartMAX up to 400 mW
• Camera: BeeEye C03
• Battery: 1S, PH2.0 connector, 300 mAh recommended
• Weight: 21.2 g without battery, 28.8 g with battery
• In the box: AcroBee65 Brushed V2 BNF, 4 spare props, grommets and screws

You will need an ELRS radio, analog 5.8 GHz goggles and 1S PH2.0 batteries. Brushed motors wear with use, so keep a spare set of 6 mm brushed motors on hand once you are flying daily.