TBS High-Density COB LED Strip 5V (2.7mm × 1m)

Add seamless, neon-like illumination to your FPV drone with this high-density COB LED strip. Unlike SMD strips with distinct light dots, Chip-on-Board (COB) packs diodes tightly under a phosphor diffuser for a smooth, continuous glow.

Key features

• 480 LEDs per metre for a dense, uniform band of light without visible hot spots.
• Self-adhesive backing sticks straight onto clean, dry carbon arms, duct lips or 3D-printed mounts with no screws or clips.
• Cuttable every 25mm at marked points, so a single 1-metre strip can be divided across several smaller sections.
• Ultra-slim 2.7mm width sits flush against standard FPV frame arms.
• Runs directly on a 5V input for simple wiring to most drone electronics.

Specifications

• Input voltage: 5V DC
• LED density: 480 LEDs/metre
• Length: 1 metre
• Width: 2.7mm
• Cut interval: every 25mm
• Colours: Green, Yellow, Pink, Red, Blue, Ice Blue

High-density COB LEDs draw meaningful current, so if you run a long section, check that your flight controller's 5V BEC has the amperage headroom, or feed the strip from a dedicated 5V regulator.