SpeedyBee Programmable 2812 Arm LEDs (Set of 4)

SpeedyBee's programmable 2812 arm LEDs are addressable RGB strips that sit on the arms of an FPV quad and run from the flight controller's LED-strip output, so colours and patterns are set in Betaflight or INAV. A set of four covers one quadcopter, one strip per arm.

Key features

• Four individually addressable RGB LEDs per strip, 16 in the set

• Connect with the included 3-pin SH1.0 cables or solder straight to the pads

• Daisy-chain strips through the DIN/DO pads up to Betaflight's 32-LED limit (8 strips)

• 1.18 g per strip, so all four add under 5 g to the build

• Plug-and-play on SpeedyBee stacks that have a 3-pin LED socket

Specifications

• Model: 2812-ARMLIGHT

• LEDs: 4x addressable RGB per strip

• Supply voltage: 5 V

• Pads: DIN, DO, 5V, GND

• Dimensions: 37 x 6.5 x 4.3 mm per strip

• Weight: 1.18 g per strip

• In the box: 4x arm LED strips, 4x 50 mm 3-pin SH1.0 female cables, 4x heatshrink tubes

Your flight controller needs an LED-strip pad (5V, GND and LED signal), which most Betaflight and INAV boards have. The 6.5 mm width suits 5-inch freestyle arms; measure narrow toothpick arms before fitting.