Hobbywing QuicRun WP 1080 G2 Brushed ESC

The Hobbywing QuicRun WP 1080 G2 is a waterproof brushed ESC for 1/10 rock crawlers and other RC cars running 540 or 550-size brushed motors. It handles 80A continuous and 400A peak on 2S-3S LiPo or 5-9 cell NiMH, and its IP67-rated, dust-proof build lets you drive through mud, puddles and wet trails.

Key features

• Switch-mode BEC selectable at 6V, 7.4V or 8.4V, rated 4A continuous and 6A peak
• Four running modes: forward with brake, forward/reverse with brake, forward/reverse, and real car mode
• Real car mode flips motor direction from a spare transmitter channel, and drag brake strength can be changed from the radio while driving
• 15 programmable items, including PWM drive frequency (1-16 kHz), drag brake and freewheeling (DEO), set with the SET button or the LED Program Box
• Built-in capacitor module and a fan mount for extra cooling
• Protection against over-voltage, low battery voltage, overheating and throttle signal loss

Specifications

• Continuous / peak current: 80A / 400A
• Motor: Brushed, 540 / 550 size
• Battery: 2S-3S LiPo, 5-9 cell NiMH
• BEC: Switch-mode, 6V / 7.4V / 8.4V, 4A (6A peak)
• Waterproofing: IP67
• Wires: 14AWG, 200 mm
• Battery connector: XT60
• Motor connectors: 4.0 mm bullets (female)
• Size: 37.2 x 31.9 x 18.4 mm
• Weight: 70.2 g with wires
• Programming: SET button, LED Program Box
• Firmware updates: Not supported

Set the BEC to suit your steering servo: 6V for standard servos, 7.4V or 8.4V only for servos rated for high voltage. The sealing handles splashes, wading and mud, but avoid leaving the ESC submerged and dry it after a wet run.