FlySky CT6B 2.4GHz 6CH Transmitter with FS-R6B Receiver

The FlySky CT6B is an entry-level six-channel 2.4GHz radio supplied with the FS-R6B receiver. It covers trainer planes, gliders, helicopters and basic multirotors, with settings edited on its backlit screen or from a PC over the included programming lead.

Key features

• Six proportional channels with adjustable end points, reversing and dual rates
• Aeroplane, glider and helicopter model types, each with its own mixes
• Runs on 8 x AA batteries with a low-voltage alarm below 9V, plus PC programming via the supplied lead and software
• AFHDS frequency hopping across the 2.4055-2.475GHz band for interference-free flying alongside other pilots
• FS-R6B receiver included, with six PWM outputs; PPM is available from the transmitter's DSC port for trainer or simulator use

Specifications

• Channels: 6
• Protocol: AFHDS, 2.4GHz
• Modulation: GFSK, 500 kHz bandwidth
• RF power: under 20 dBm
• Model memory: 8 models
• Default stick mode: Mode 2 (left-hand throttle)
• DSC port: PPM output
• Transmitter dimensions: 189 x 97 x 295 mm
• Transmitter weight: 511 g
• Transmitter power: 8 x AA batteries (12V DC)
• Receiver: FS-R6B, 6 channels
• Receiver sensitivity: -105 dBm
• Receiver power: 4.0-6.5V
• Receiver weight: 13 g
• In the box: CT6B transmitter, FS-R6B receiver, USB programming cable, software CD, receiver binding plug, user manual

The transmitter's PPM output suits trainer leads and simulators, and the FS-R6B binds to other AFHDS FlySky radios if you keep a spare airframe on the bench.