DarwinFPV Cement F4 60A Waterproof Stack

The DarwinFPV Cement F4 60A stack is a flight controller and 4-in-1 ESC combo rated IP67. DarwinFPV says it survives 30 minutes submerged at 0.5m. It suits bash and freestyle quads up to 7 inches on 3-6S that fly through wet grass, snow and rain.

Key features

• IP67 dust and water resistance for the stack itself
• F4 processor running at up to 288MHz with an ICM42688 gyro
• TVS surge, soft-start, reverse-polarity, short-circuit/over-current and over-temperature protection
• Up to 38 onboard ceramic capacitors, so builds under 5 inches need no electrolytic
• Solder pads 51% larger than the previous Cement ESC, plus multi-level status LEDs

Specifications

• ESC current: 60A continuous, 80A peak
• Gyro: ICM42688
• Input: 3-6S LiPo
• Mounting: 30.5 x 30.5mm
• Ingress protection: IP67
• Build size: up to 7 inch

In the box you get the stack, ESC (8-pin), analog VTX, HD VTX, receiver and GPS cables, an XT60 connector with power lead, a 35V 1000uF capacitor, four M3x30 screws, four M3 nylon nuts and stickers. The waterproofing covers only the stack, so protect your receiver, VTX and motors separately. No receiver is included, and the supplied cables suit both analog systems and DJI air units.