AUSTOR 60-40 Rosin Core Solder Wire 0.8mm, 20g

AUSTOR 60/40 tin-lead solder wire with a rosin flux core, drawn to 0.8 mm — a practical all-round diameter for drone and electronics work such as motor wires, ESC and flight-controller pads, and small connectors. The 20 g pack suits a bench kit or a field-repair box.

Key features

• 60% tin / 40% lead alloy melts at 185–190 °C, so joints flow at moderate iron temperatures
• 1.8% rosin flux core cleans the joint as the solder melts; add extra flux only on large or oxidised joints
• 0.8 mm wire lays down small, controlled amounts on fine pads
• Leaded alloy wets and flows more easily than lead-free solder, which makes it forgiving while you learn

Specifications

• Alloy: Sn60/Pb40
• Flux: Rosin core, 1.8%
• Melting point: 185–190 °C
• Diameter: 0.8 mm
• Net weight: 20 g

For thick battery leads and XT60 or XT90 connectors, pair it with a wide chisel or knife tip and a hotter iron setting. The wire contains lead: work in a ventilated space and wash your hands after handling it.