Hollow Carbon Fiber Tube, 3mm OD x 2mm ID

A hollow round carbon fibre tube with a 3 mm outer diameter and a 2 mm bore, for light structural jobs on drones, RC aircraft and models: antenna supports, push-rods and linkages, wing spars and small braces.

Key features

• 0.5 mm wall gives high stiffness for very little weight
• The hollow core can route a thin wire through the tube
• Cut to length with a fine-toothed saw or a rotary cut-off disc; wrapping the cut line with tape limits splintering
• Bonds well with epoxy for permanent joints

Specifications

• Outer diameter: 3 mm
• Inner diameter: 2 mm
• Wall thickness: 0.5 mm
• Section: round, hollow
• Material: carbon fibre

Carbon dust is electrically conductive and irritates skin and lungs, so cut and sand with a mask on and keep the dust away from flight electronics.