Hobbywing XRotor X6 Plus G2 150KV Power System

The Hobbywing XRotor X6 Plus G2 is the second-generation X6 Plus: a 6218 150KV motor and FOC ESC integrated into one sealed unit for agricultural sprayers, survey platforms and heavy-lift multirotors on 12–14S LiPo. It is offered with the 2480 folding propeller or without a propeller, in CW and CCW rotation.

Key features

• 12.5 kg maximum thrust and a 6 kg recommended take-off weight per axis, at 7.3 g/W efficiency
• Dual throttle input with redundancy: PWM plus CAN (Cyphal/UAVCAN, DroneCAN) carrying real-time telemetry to the flight controller
• Built-in fault logging, with firmware updates through the flight controller
• IPX6 sealed housing with a dual-layer cooling design for spraying in rain, dust and pesticide mist
• Power-on self-check plus voltage, current and stall protection
• Clamps directly onto 30 mm outer-diameter carbon fibre arm tubes

Specifications

• Motor: 6218, 150KV, 28N24P, 68.9 mm diameter
• Battery: 12–14S LiPo (63 V maximum)
• Rated voltage: 46 V (12S) / 54 V (14S)
• ESC current: 25 A continuous, 80 A peak (3 s)
• Rated output power: 705 W max continuous
• Max thrust: 12.5 kg per axis (sea level)
• Recommended take-off weight: 6 kg per axis
• Efficiency: 7.3 g/W at recommended load
• Propeller (combo variants): 2480 folding, 24 × 8 inch, carbon fibre-reinforced
• Arm tube: 30 mm outer diameter
• Cables: 14 AWG power, 870 mm; signal, 1000 mm
• Weight: 748 g with cables and propeller
• Ingress protection: IPX6
• Operating temperature: −20 to 50 °C

At 6 kg per axis, four units suit a take-off weight of about 24 kg and six units about 36 kg, the range of 5–10 L spray drones and training UAVs. Order CW and CCW units in equal numbers to match your frame's motor layout.