GNB 3S 11.4V 880mAh 160C LiPo Battery (XT30)

The Gaoneng (GNB) 3S 880mAh 11.4V LiHV battery provides high-output current for 3-inch to 4-inch micro toothpicks, cinewhoops, and sub-250g FPV freestyle builds. Utilizing High Voltage Lithium Polymer (LiHV) chemistry with a nominal voltage of 3.8V per cell, it delivers higher energy density and sustained motor RPM under load compared to standard 11.1V packs.

Key features

• High-voltage LiHV cell chemistry capable of charging up to 4.35V per cell (13.05V total pack voltage) for reduced throttle sag.
• Rated for 160C continuous discharge to support aggressive punch-outs and high-amp current draws on micro brushless setups.
• Factory-fitted with an XT30 discharge connector and standard JST-XH balance lead.
• Optimised capacity-to-weight ratio for extended flight times on lightweight 3S micro frames.

Specifications

• Cell Chemistry: LiHV (High Voltage Lithium Polymer)
• Cell Count: 3S (3 cells in series)
• Nominal Voltage: 11.4 V (3.8 V per cell)
• Maximum Charge Voltage: 13.05 V (4.35 V per cell)
• Capacity: 880 mAh
• Energy: 10.03 Wh
• Continuous Discharge Rating: 160 C
• Charge Rate: 1-5C
• Discharge Connector: XT30
• Balance Connector: JST-XH
• Dimensions: 64 x 30 x 22 mm
• Weight: 74 g

Set your balance charger to LiHV mode (4.35V end-voltage per cell) to utilise the full 880mAh capacity. Ensure your micro drone's ESC and power distribution wiring are rated for 3S high-voltage operation with an XT30 pigtail.