FrSky Taranis Q X7 ACCESS Transmitter (White) with RX8R Pro Receiver

This bundle pairs the FrSky Taranis Q X7 ACCESS 2.4GHz transmitter in white with an FrSky RX8R Pro telemetry receiver, giving a fixed-wing, helicopter or multirotor build a complete radio link in one box. The radio runs open-source OpenTX and is set to Mode 2 (left-hand throttle) by default.

Key features

• ACCESS radio: up to 24 channels over a high-speed module digital interface, lower latency than ACCST and wireless firmware updates for FrSky OTA receivers

• RX8R Pro receiver: eight PWM outputs (channels 1–8 or 9–16) plus all 16 channels on SBUS, with telemetry and an analogue RSSI output

• Controls: quad ball-bearing gimbals, six switches (four 3-position, one 2-position, one momentary) and two knobs

• Long-range upgrade: the JR module bay takes the FrSky R9M 2019 module, which offers four switchable RF power levels

• Pilot tools: spectrum analyser, wired trainer port, haptic vibration, voice alerts, flight data logging and microSD model memory; model files carry over from the Taranis X9D, X9D Plus and X9E

Specifications

• Radio RF module: ISRM-N internal, 2.4GHz

• Radio channels: 24 (ACCESS), 16 (ACCST D16)

• Radio operating voltage: 6.5–8.4 V

• Radio power: 2 x 18650 Li-ion cells, balance-charged via Mini USB, or a 2S pack with a 3-pin JST-XH plug up to 92 x 57 x 18 mm

• Radio dimensions: 202.2 x 189.4 x 96 mm

• Radio weight: 613 g without battery

• Receiver channels: 8 PWM, 16 via SBUS

• Receiver operating voltage: 3.5–10 V

• Receiver dimensions: 46.3 x 26.6 x 14.2 mm

• Receiver range: full range, over 1.5 km

The RX8R Pro is an ACCST receiver, so bind it in ACCST D16 mode and keep its firmware version matched to the radio's internal module. Batteries and a charger are not included.