DOGCOM 6S 1380mAh 150C LiPo Battery (XT60)

DOGCOM 6S 1380mAh 150C LiPo Battery (XT60) is a compact 6S pack aimed at 5-inch FPV freestyle and racing builds that run an XT60 power lead and need high current delivery during sharp throttle punches. With a 6S (22.2V nominal) configuration and a 150C rating, it suits pilots tuning for crisp response on powerful motor/prop setups where voltage sag can spoil feel and lap times.

Key features

• 6S LiPo voltage: 22.2V nominal for modern 6S 5-inch powertrains and efficient high-RPM setups.

• 1380mAh capacity: balances punch and weight for typical 5-inch freestyle/race flight times depending on tune and throttle use.

• 150C discharge rating: designed for high burst current demand during rapid throttle changes and recovery moves.

• XT60 connector: compatible with the most common 30A–60A+ FPV quad battery lead standard (verify your quad’s plug before ordering).

Specifications

• Brand: DOGCOM

• Cell count: 6S

• Nominal voltage: 22.2V

• Capacity: 1380mAh

• Discharge rating: 150C

• Burst discharge: 300C

• Battery connector: XT60

• Charge plug: JST-XHR

• Weight: 223 g

• Dimensions: 78 x 38 x 38.5 mm

Choose this pack if your quad is wired for XT60 and your build is tuned for 6S; if you are on XT30 or 4S, pick a matching connector/cell-count pack to avoid adapters and re-soldering.