RCINPower GTS V3 0703 Micro Motor

The RCINPower GTS V3 0703 is a 1S brushless micro motor for 75 mm whoops and heavier 65 mm builds, offered here in 23000KV with a teal finish. Its taller 7 x 3 mm stator adds torque over the 0702, so it copes better with 40 mm props and the extra weight of an HD camera. Sold singly; a quad needs four.

Key features

• 9N12P winding on a 7 x 3 mm stator
• Unibell construction running on two ball bearings
• Leads soldered to a PCB on the motor base: a pulled wire is re-soldered to the pad, not the windings
• Pre-fitted connector for 1S whoop AIO boards with JST motor sockets
• Peak efficiency above 83% at 1-2 A

Specifications

• KV: 23000
• Configuration: 9N12P
• Stator: 7 x 3 mm
• Shaft: 1.0 mm
• Motor size: 9.6 x 9.6 mm
• Weight: 1.85 g with plug
• Cells: 1S
• Max current: 5.9 A
• Max continuous power: 24.8 W
• Internal resistance: 206 mΩ
• Idle current: 0.2 A at 5 V
• Mounting: 3x M1.4 on a 6.6 mm circle
• In the box: 1x motor, 1x screw set

The 6.6 mm three-hole pattern fits standard 65-75 mm whoop frames. Pair it with 31-40 mm whoop props that have a 1.0 mm hole; 1.5 mm-hole props will be loose.