HOTA F6 250W 15A 1-6S Quad Channel DC Charger

The HOTA F6 is a DC-powered smart charger with four independent channels, built for FPV pilots and builders who need to charge several packs in one session. It handles 1-6S LiPo, LiHV, LiFe, Li-ion and NiMH batteries and runs from a 10.5-30V DC input.

Key features

• Four channels, each delivering up to 250W and 15A independently, for up to 1000W of total charging power.

• Synchronous mode links two channels to charge one battery at up to 500W.

• Colour 2.8-inch display with a wheel-and-button interface for charge settings.

• Discharges at up to 12W per channel internally, or up to 250W per channel with an external load.

• Built-in servo tester: sends or reads PWM/PPM signals to check a receiver or servo.

• Front panel carries a USB-A port (5V 2.1A) and a USB-C port (up to 45W) for charging phones, tablets and laptops.

Specifications

• Input: 10.5-30V DC via XT60 (23 V or higher needed for full power)

• Channels: 4, up to 250W and 15A each

• Balance current: 1000 mA per channel

• Discharge current: 0.1-3 A per channel

• Battery types: LiPo, LiHV, LiFe, Li-ion (1-6S); NiMH, NiCd (1-14S); Pb (2-24 V)

• Output ports: 4 x XT60

• Display: 2.8-inch IPS, 320 x 240

• Dimensions: 115 x 121 x 46mm

• Weight: 475 g

• In the box: charger, manual

Use a DC supply rated for the combined load of every channel you plan to run at once, and match the charge current to each pack's rating.