Automatic Self-Adjusting Wire Stripper and Cutter

A hand-held automatic wire stripper that clamps the wire, cuts the insulation and pulls it off in a single squeeze, then springs back ready for the next strip. The jaws adjust to the wire on their own and a built-in cutter trims leads to length, which speeds up soldering battery leads, motor wires and ESC power cables on drone builds.

Key features

• Self-adjusting jaws: no gauge hole to pick between wire sizes
• Tension-loaded grip holds the wire centred so the blades don't nick or fray strands
• Removes up to 1 in (25 mm) of insulation in one stroke
• Alloy carbon steel blades and a recoil spring that resets the tool after each strip
• Cast alloy body with a corrosion-resistant coating and a palm-shaped grip

Specifications

• Wire range: 0.2–6 mm² (roughly 24–10 AWG)
• Strip length: up to 1 in (25 mm) per stroke
• Blade material: alloy carbon steel
• Dimensions: 175 × 71 × 19 mm
• In the box: 1 wire stripper and cutter

It covers the 12–22 AWG silicone wire used for battery leads, motor wires and power distribution. Very thin 28–30 AWG signal wire sits below its rated range and is better stripped with a fine gauged stripper.